Support Center

PS3 Netflix - Bell 2Wire 2700HG Router Tunlr Setup

Last Updated: Jul 09, 2015 11:05AM EDT

PS3 Netflix - Bell 2Wire 2700HG Router Tunlr Setup:

Are you having problems switching Netflix regions on your PS3? Netflix has started auto-switching DNS servers in order to improve the performance of their service. This usually results in good service on their part, but it can potentially disable Tunlr from working on PS3's Netflix app.

Netflix is one of the most incredible modern conveniences, and it's even better when you can utilize your PS3 to watch it. This step-by-step tutorial aims to help fix the stuck region issue that may prevent you from doing so while using Netflix on your PS3 when it's connected to a Bell 2Wire 2700HG router.

If our previous guide didn't resolve your issue, you will need to make changes to your router settings.

Note: This guide assumes that you are capable of logging in to your router's management screen. You may need to use login details that have been set specifically for your router.

PS3 Netflix Bell 2Wire 2700HG Router Setup

  1. Access the router's administration page. For information on how to do this, please consult the user manual that came with your router. It will tell you the URL of the page, which you can then access through your web browser. You can usually access your router by typing one of the following into your browser's address bar:
  2. Check Your Router for DNS Servers - You're going to need to be able to configure at least two main DNS servers for your router. This will ensure that you have both a primary and secondary DNS network, which is a crucial step to fixing the region stuck issue.
  3. Log in to your router and click the Summary page underneath Broadband Link. It should show you numerous stats about your broadband connection, but you should only be interested in the details listed as Primary DNS and Secondary DNS.
  4. Configure your DNS Servers - You may not have two DNS servers set or your may have the wrong DNS servers set in accordance to the default settings of your router. So long as you can set two DNS servers, you shouldn't have a problem.
  5. Click on Configure underneath Broadband Link. You'll find the DNS configuration boxes all the way at the bottom of the page.
  6. Primary DNS should have in the adjacent field, and Secondary DNS should have
  7. You will need to click Submit and ensure that the DNS servers are set. You may need to refresh he page, restart your router or log in to your router after logging out to ensure that it works correctly.
  8. Configure a Static Router IP - The last process to complete is to add three static routes to your router. You'll click on Static Routes under the Advanced menu to access this. You will need to make three separate static routes for each subnet IP listed below. After you finish configuring each route, ensure that you click the Add button. This will put the new changes into effect after saving them.
  9. Static Route 1
    • Subnet IP:
    • Subnet Mask:
    • Gateway IP: any besides the router's IP address
  10. Static Route 2
    • Subnet IP: (Tunlr Primary DNS Address)
    • Subnet Mask:
    • Gateway IP: any besides the router's IP address
  11. Static Route 3
    • Subnet IP: (Tunlr Secondary DNS Address)
    • Subnet Mask:
    • Gateway IP: any besides the router's IP address
  12. Press Add.
  13. Verify that these routes are listed underneath the Routes List below the entry fields for the routes.
  14. You may now proceed to setting up your PS3 to enable Netflix.

Contact Us
seconds ago
a minute ago
minutes ago
an hour ago
hours ago
a day ago
days ago
Invalid characters found