Support Center

PS3 Netflix - Actiontec v1000h Router Tunlr Setup

Last Updated: Jul 09, 2015 11:00AM EDT

PS3 Netflix - Actiontec v1000h Router Tunlr Setup:

Are you having problems switching Netflix regions on your PS3? Netflix has started auto-switching DNS servers in order to improve the performance of their service. This usually results in good service on their part, but it can potentially disable Tunlr from working on PS3's Netflix app.

If our previous guide didn't resolve your issue, you will need to make changes to your router settings.

This guide will show you how to fix the stuck region issue on the Actiontec v1000H router. There is no need to install any special software or to make any complicated changes to the router, as all that you need to do is to log in to the admin panel of your router to get started.


PS3 Netflix Actiontec v1000h Router Setup

  1. To make use of the following steps, please make sure you are logged in as a standard admin on your Actiontec v1000h router. You can usually access your router by typing one of the following into your browser's address bar:
    192.168.0.1
    192.168.1.1
    192.168.2.1
    192.168.11.1
  2. You will need to ensure that our DNSs are setup correctly in your router. In order to do this, follow these instructions:
  3. Go to the Advanced Setup tab in your router's admin panel.
  4. You will be presented with various options on the left. Select WAN IP Address and scroll down until you see boxes for DNS.
  5. Under Select the DNS type, you should ensure that the Static DNS Addresses option has been selected and that the addresses entered are 45.33.81.76 for the primary DNS and 45.33.12.13 for the secondary DNS.
  6. Click on the Apply button to save your changes if you have made any.
  7. Next, you will need to setup a static route. Just follow these instructions to do so:
  8. Select the Static Routing option on the left.
  9. You will need to setup some new static routes at this point. Simply enter the following information in the relevant fields:
    • Destination IP: 8.8.8.8
    • Subnet Mask: 255.255.255.255
    • Gateway IP: Any valid local IP address, other than the one used by the router itself
    • Interface: LAN
  10. Hit Apply. Once applied, follow the same steps again with the following details:
    • Destination IP: 45.33.81.76 (Tunlr Primary DNS Address)
    • Subnet Mask: 255.255.255.255
    • Gateway IP: Any valid local IP address, other than the one used by the router itself
    • Interface: LAN
  11. Hit Apply. Once applied, follow the same steps one more time with the following details:
    • Destination IP: 45.33.12.13 (Tunlr Secondary DNS Address)
    • Subnet Mask: 255.255.255.255
    • Gateway IP: Any valid local IP address, other than the one used by the router itself
    • Interface: LAN
  12. Hit Apply.
  13. Once you have done the steps in this guide, you can proceed to setup your PS3.

Contact Us

40e07bf387912aaff27068e637f1622e@tunlr.desk-mail.com
http://assets0.desk.com/
false
desk
Loading
seconds ago
a minute ago
minutes ago
an hour ago
hours ago
a day ago
days ago
about
false
Invalid characters found
/customer/en/portal/articles/autocomplete