Support Center

PS3 Netflix - Belkin Router Tunlr Setup

Last Updated: Jul 09, 2015 11:04AM EDT

PS3 Netflix - Belkin Router Tunlr Setup:

Are you having problems switching Netflix regions on your PS3? Netflix has started auto-switching DNS servers in order to improve the performance of their service. This usually results in good service on their part, but it can potentially disable Tunlr from working on PS3's Netflix app.

Watching Netflix from any region is the primary benefit of the Tunlr service, but the settings for your Belkin router and PS3 must be modified for the service to work. Change the Belkin settings first and then the PS3 settings.

If our previous guide didn't resolve your issue, you will need to make changes to your router settings.


PS3 Netflix Belkin Router Setup

  1. Tunlr has two main DNS server addresses: 45.33.81.76 and 45.33.12.13.
  2. Navigate to the router's administration page at 192.168.1.1, 192.168.0.1, or 192.168.2.1. If you can't find the page, check your Belkin router user manual for instructions.
  3. Locate the DNS settings. If prompted, enter your username and password and then locate them. Confirm that you have the two main DNS server addresses entered on the screen. If they are not shown, enter them in the appropriate fields.
  4. On the screen's left sidebar, choose Static Route to access the LAN > Static Route Parameter screen.
  5. You will be creating a new static route at this point. You will need to add the following information in the fields:
    • Network Address: 8.8.8.8
    • Subnet Mask: 255.255.255.255
    • Gateway: any local IP address that is valid, except for the Belkin router's IP address
    • Interface (if shown): LAN
  6. Press Add. Once added, follow the same steps again with the following details:
    • Network Address: 45.33.81.76 (Tunlr Primary DNS Address)
    • Subnet Mask: 255.255.255.255
    • Gateway: any local IP address that is valid, except for the Belkin router's IP address
    • Interface (if shown): LAN
  7. Press Add. Once added, follow the same steps one more time with the following details:
    • Network Address: 45.33.12.13 (Tunlr Secondary DNS Address)
    • Subnet Mask: 255.255.255.255
    • Gateway: any local IP address that is valid, except for the Belkin router's IP address
    • Interface (if shown): LAN
  8. Press Add.
  9. Restart, or power cycle, your Belkin router and confirm that it is working by going to the Tunlr URL at Tunlr.com
  10. Your router should now be set up correctly. You may proceed to configure your PS3.

Contact Us

40e07bf387912aaff27068e637f1622e@tunlr.desk-mail.com
http://assets0.desk.com/
false
desk
Loading
seconds ago
a minute ago
minutes ago
an hour ago
hours ago
a day ago
days ago
about
false
Invalid characters found
/customer/en/portal/articles/autocomplete