Support Center

PS3 Netflix - Asus Router Tunlr Setup

Last Updated: Jan 13, 2016 10:49AM EST

PS3 Netflix - Asus Router Tunlr Setup:

Are you having problems switching Netflix regions on your PS3? Netflix has started auto-switching DNS servers in order to improve the performance of their service. This usually results in good service on their part, but it can potentially disable Tunlr from working on PS3's Netflix app.

If you're experiencing the PS3 stuck region issue and have an Asus RT-N15 or RT-N56u router, this guide will tell you how to rapidly fix it. Just follow the instructions and you should have the problem resolved in only a couple of minutes.

If our previous guide didn't resolve your issue, you will need to make changes to your router settings.

Note: After following the below steps, please correctly set up your PS3's custom internet settings to ensure web connectivity.


PS3 Netflix Asus Router Setup

  1. Access the router's administration page. For information on how to do this, please consult the user manual that came with your router. It will tell you the URL of the page, which you can then access through your web browser. You can usually access your router by typing one of the following into your browser's address bar:
    192.168.0.1
    192.168.1.1
    192.168.2.1
    192.168.11.1
  2. Once you have entered the administration page, select LAN from the menu on the left and click on the DHCP Server tab on the page.
  3. In the DNS Settings section, make sure that the address 45.33.81.76 is entered. Apply the changes you've made if necessary.
  4. Next, click the Route tab. You will be creating a new static route at this point. Make sure that the Enable static routes option is set to Yes before continuing. You will need to add the following information in the boxes:
    • Network/Host IP: 8.8.8.8
    • Net Mask: 255.255.255.255
    • Gateway: Any valid local IP address, other than the one being used by your router.
    • Metric: 2
    • Interface: LAN
  5. Press Add. Once added, follow the same steps again with the following details:
    • Network/Host IP: 45.33.81.76 (Tunlr Primary DNS Address)
    • Net Mask: 255.255.255.255
    • Gateway: Any valid local IP address, other than the one being used by your router.
    • Metric: 2
    • Interface: LAN
  6. Press Add. Once added, follow the same steps one more time with the following details:
    • Network/Host IP: 45.33.12.13 (Tunlr Secondary DNS Address)
    • Net Mask: 255.255.255.255
    • Gateway: Any valid local IP address, other than the one being used by your router.
    • Metric: 2
    • Interface: LAN
  7. Press Add.
  8. Click on the Apply button to save your changes.
  9. Your router should now be set up correctly. You may now proceed to configure your PS3.

Contact Us

40e07bf387912aaff27068e637f1622e@tunlr.desk-mail.com
http://assets0.desk.com/
false
desk
Loading
seconds ago
a minute ago
minutes ago
an hour ago
hours ago
a day ago
days ago
about
false
Invalid characters found
/customer/en/portal/articles/autocomplete