Support Center

PS3 Netflix - Actiontec r1000h Router Tunlr Setup

Last Updated: Jul 09, 2015 11:02AM EDT

PS3 Netflix - Actiontec r1000h Router Tunlr Setup:

Are you having problems switching Netflix regions on your PS3? Netflix has started auto-switching DNS servers in order to improve the performance of their service. This usually results in good service on their part, but it can potentially disable Tunlr from working on PS3's Netflix app.

If our previous guide didn't resolve your issue, you will need to make changes to your router settings.

Note: After following the below steps, please correctly set up your PS3's custom internet settings to ensure web connectivity.


PS3 Netflix Actiontec r1000h Router Setup

  1. To make use of the following steps, please make sure you are logged in as a standard admin on your Actiontec r1000h router. You can usually access your router by typing one of the following into your browser's address bar:
    192.168.0.1
    192.168.1.1
    192.168.2.1
    192.168.11.1
  2. First double check that both of our main DNSs (Domain Name System) are already entered and saved into your router's settings. If you are unsure, you can look by going to Advanced Settings after logging in as an administrator.
  3. Once your router is set up and ready to go, look at WAN IP settings--it is a sub-process under IP Addressing in the menu on the sidebar to the left. Your Primary and Secondary DNSs should be as follows:
    • Primary DNS: 45.33.81.76
    • Secondary DNS: 45.33.12.13
  4. After this is set up, you need to enable a static route. To do this, first go to Advanced Setup located in the toolbar across the header. Then go to the sub-process Static Routing--located in the same left-hand sidebar, only this time under Routing.
  5. Enter the following information to establish a new static route:
    • Destination IP: 8.8.8.8
    • Subnet Mask: 255.255.255.255
    • Gateway IP: leave blank
    • Interface: leave blank
  6. Hit Apply. Once applied, follow the same steps again with the following details:
    • Destination IP: 45.33.81.76 (Tunlr Primary DNS Address)
    • Subnet Mask: 255.255.255.255
    • Gateway IP: leave blank
    • Interface: leave blank
  7. Hit Apply. Once applied, follow the same steps one more time with the following details:
    • Destination IP: 45.33.12.13 (Tunlr Secondary DNS Address)
    • Subnet Mask: 255.255.255.255
    • Gateway IP: leave blank
    • Interface: leave blank
  8. Hit Apply.
  9. After you finish, continue with setting up your PS3 and its Internet settings. Now you will never have to worry about accessing international content again.

Contact Us

40e07bf387912aaff27068e637f1622e@tunlr.desk-mail.com
http://assets3.desk.com/
false
desk
Loading
seconds ago
a minute ago
minutes ago
an hour ago
hours ago
a day ago
days ago
about
false
Invalid characters found
/customer/en/portal/articles/autocomplete