Support Center

PS3 Netflix - TP-Link Router Tunlr Setup

Last Updated: Jul 09, 2015 11:08AM EDT

PS3 Netflix - TP-Link Router Tunlr Setup:

Are you having problems switching Netflix regions on your PS3? Netflix has started auto-switching DNS servers in order to improve the performance of their service. This usually results in good service on their part, but it can potentially disable Tunlr from working on PS3's Netflix app.

If our previous guide didn't resolve your issue, you will need to make changes to your router settings.

Note: After following the steps below, please continue setting up your PS3's Internet Settings. This will help ensure that you continue experiencing Internet connectivity.


PS3 Netflix TP-Link Router Setup

  1. Sign into your router's admin area. You can usually access your router by typing one of the following into your browser's address bar:
    192.168.0.1
    192.168.1.1
    192.168.2.1
    192.168.11.1
  2. Before going any further, you want to make sure that our DNS (Domain Name Server) is entered into your router. To check this information, click on the Status tab on the left-hand sidebar and look under the WAN header. While on this screen, also take note of your router's IP address. You will need it later.
  3. You will want to also check the DNS in the PPPoE Advanced Settings as well. You can reach this by clicking on the WAN sub-process under the Network tab. Check the box labeled Use the following DNS Servers if you typically connect to the Internet using PPPoE.
  4. Once you have finished these preliminary steps, click on the Advanced Routing tab and select Add. To establish a static route, you will need to accurately input the following information as seen below:
    • Destination IP Address: 8.8.8.8
    • Subnet Mask: 255.255.255.255
    • Default Gateway: noted IP address from before
    • Status: Enabled
  5. Hit Save. Once saved, follow the same steps again with the following details:
    • Destination IP Address: 45.33.81.76 (Tunlr Primary DNS Address)
    • Subnet Mask: 255.255.255.255
    • Default Gateway: noted IP address from before
    • Status: Enabled
  6. Hit Save. Once saved, follow the same steps one more time with the following details:
    • Destination IP Address: 45.33.12.13 (Tunlr Secondary DNS Address)
    • Subnet Mask: 255.255.255.255
    • Default Gateway: noted IP address from before
    • Status: Enabled
  7. Hit Save.
  8. After entering these three IP Addresses, you should see all of the inputted information listed in a table labeled Static Routing.
  9. Once you have finished, continue setting up your PS3 as normal.

Contact Us

40e07bf387912aaff27068e637f1622e@tunlr.desk-mail.com
http://assets0.desk.com/
false
desk
Loading
seconds ago
a minute ago
minutes ago
an hour ago
hours ago
a day ago
days ago
about
false
Invalid characters found
/customer/en/portal/articles/autocomplete