Support Center

PS3 Netflix - TRENDnet Router Tunlr Setup

Last Updated: Jul 09, 2015 11:08AM EDT

PS3 Netflix - TRENDnet Router Tunlr Setup:

Are you having problems switching Netflix regions on your PS3? Netflix has started auto-switching DNS servers in order to improve the performance of their service. This usually results in good service on their part, but it can potentially disable Tunlr from working on PS3's Netflix app.

If our previous guide didn't resolve your issue, you will need to make changes to your router settings.

Note: After following the below instructions, please continue properly enabling your PS3's Internet to ensure continuous web connectivity.


PS3 Netflix TRENDnet Router Setup

  1. Sign into your router's admin area. You can usually access your router by typing one of the following into your browser's address bar:
    192.168.0.1
    192.168.1.1
    192.168.2.1
    192.168.11.1
  2. First things first, you need to make sure that your route already has our DNS (Domain Name Servers) entered. To check this, go to the Internet Settings screen and look under the DNS and Advanced Settings header. Check both the Primary DNS Server and Secondary DNS Server and that the tick box beside Use these DNS Servers is checked.
  3. Next copy down the IP address of the router. You can find it on the same screen under the Static WAN Mode header in the field marked IP Address. You will need this later.
  4. After finishing with the Internet Settings screen, click on the Advanced tab on the left and select Routing from the options listed.
  5. You need to add the below information into the fields under the Add Route header. After checking the tick box labeled Enable, input the information exactly as it is shown below:
    • Enable: check
    • Destination IP: 8.8.8.8
    • Netmask: 255.255.255.255
    • Gateway: noted IP address from before
    • Interface: WAN
    • Metric: 2
  6. Click Save. Once saved, continue adding another route with the following details:
    • Enable: check
    • Destination IP: 45.33.81.76 (Tunlr Primary DNS Address)
    • Netmask: 255.255.255.255
    • Gateway: noted IP address from before
    • Interface: WAN
    • Metric: 2
  7. Click Save. Once saved, continue adding one more route with the following details:
    • Enable: check
    • Destination IP: 45.33.12.13 (Tunlr Secondary DNS Address)
    • Netmask: 255.255.255.255
    • Gateway: noted IP address from before
    • Interface: WAN
    • Metric: 2
  8. Click Save.
  9. Once you have finished, you should see your three Destination IP Addresses and their corresponding information listed under the Routes List.
  10. After you finish these steps, please continue enabling your PS3's Internet settings.

Contact Us

40e07bf387912aaff27068e637f1622e@tunlr.desk-mail.com
http://assets0.desk.com/
false
desk
Loading
seconds ago
a minute ago
minutes ago
an hour ago
hours ago
a day ago
days ago
about
false
Invalid characters found
/customer/en/portal/articles/autocomplete