Support Center

How to use Tunlr on a Bell Cell Pipe Router

Last Updated: Jul 09, 2015 10:51AM EDT

Bell Cell Pipe Router Tunlr Setup:

Follow these simple steps to unblock blocked websites, watch American television, and browse the web with no restrictions!

Before You Begin:

Before changing the DNS settings on your router, please make sure to note your current DNS server address(es) and write them down somewhere for backup purposes. If at any time you need to go back to your original settings, you'll be able to with your backed up information.

It may also be helpful to print this page so that if you lose Internet connection, or lose this page, you can still refer to the below instructions.

Take your time and soon you'll be watching American Netflix!

Open your router's administration page

In your browser of choice, navigate to your router's admin page. Check your router's instruction manual to find the correct address to type in your browser's address field. For most routers, it's an address that looks like or or

If you configured a username and password, enter your username and password now to log in. By default, username and password are both disabled.

Go to LAN Setting

In the left menu, under LAN Setup click on LAN Setting to enter your router's LAN settings.

Disable DNS Relay

Locate the DNS Relay option and select Disable.

Enter in Tunlr's DNS addresses

You must now manually enter in Tunlr's DNS addresses by filling in the DNS Server fields. In the DNS Server 1 field, you must enter in Tunlr's Primary DNS, and in the DNS Server 2 field, you must enter in Tunlr's Secondary DNS address. Use the addresses below to fill in these fields:

  • Primary DNS:
  • Secondary DNS:

Save settings and reboot

Confirm that you have entered in Tunlr's DNS addresses correctly, and then apply and save your settings. You should now reboot your router.


Contact Us
seconds ago
a minute ago
minutes ago
an hour ago
hours ago
a day ago
days ago
Invalid characters found