D-Link Router Tunlr Setup:
Follow these simple steps to unblock blocked websites, watch American television, and browse the web with no restrictions!
Before You Begin:
Before changing the DNS settings on your router, please make sure to note your current DNS server address(es) and write them down somewhere for backup purposes. If at any time you need to go back to your original settings, you'll be able to with your backed up information.
It may also be helpful to print this page so that if you lose Internet connection, or lose this page, you can still refer to the below instructions.
Take your time and soon you'll be watching American Netflix!
Open your router's administration page
In your browser of choice, navigate to your router's admin page. Check your router's instruction manual to find the correct address to type in your browser's address field. For most routers, it's an address that looks like 192.168.0.1 or 192.168.1.1 or 192.168.2.1.
Enter your username and password to log in. (Default username and password are both admin.
Go to Manual Internet Connection Setup
Under the Setup tab, make sure Internet is highlighted in the left menu, and then click on Manual Internet Connection Setup to enter your router's Internet settings.
If you don't see a Setup tab, but instead see a Home tab, make sure that you are on the Home tab, and then click on WAN in the left menu.
Enter in Tunlr's DNS addresses
Fill in the Primary DNS Server/Address and Secondary DNS Server/Address fields with the below information.
- Primary DNS: 184.108.40.206
- Secondary DNS: 220.127.116.11
Save settings and reboot
Confirm that you have entered in Tunlr's DNS addresses correctly, and then click on Save Settings near the top of the screen. Your Linksys router will save your new settings and reboot.